| Structural Data | Primary | Secondary |
| Pot dia | 60 / 70 mm | 90 / 110 / 120 mm |
| Type | Double desk on both sides | Double desk on both sides |
| Mechanical Data | ||
| Max. spindle speed | 10000 rpm | 10000 rpm |
| Twist range | 150 to 4000 TPM | 150 to 4000 TPM |
| Twist Direction | S/Z (Changeable) | S/Z (Changeable) |
| Traverse | ||
| Traverse length | 200 mm | 160 to 200 mm Adjustable |
| Supply | ||
| Supply Package | Aluminum Cops ID 32 x OD 36 x 240 to 320mm Lenght | Flange Bobbin |
| Supply Package Weight | Up to 800 gm / 1 kg | Up to 2 kg |
| Tension Device | Ball Type | Ball Type |
| Take-up | ||
| Take-up Package Weight | Up to 2 kg | Up to 2 kg |
| Take-up Package | Flange Bobbin | Paper / Plastic Tube |
| Power | 415 + 5%, 50 HZ |
Up to 2 kg knotless take up package
High quality for fine deniers and high twist yarns
High productivity and efficiency
Low power consumption and maintenance
Dynamically balanced spindle with high grade hardened steel
Overfeed roller with stainless steel and ceramic guide
Gearbox in oil bath
Slow start by Star - Delta panel with rpm, tpm, yarn display, ammeter and S&Z Switch
Parallel and Bi- conical take up (Roll and Papertube)
200 to 4000 tpm twist range
With state-of-the art design and optimization of the balloon along with the high quality of spindles permit high processing speeds.
Increased production due to the higher weight of the feeding package.
Fishnet yarns like 210/2 (Nylon).
For various denier size like 100, 120, 150, 210, 250, 300, 600. Bright, viscose, PV - 2 Ply & 3 Ply.
The state of the art design of the machine consumes less power and gives high production.
High quality spindles-bolsters makes less noise and less power consumption with the minimum maintenance.
Electronic sensors with cutters in the primary setup prevents single yarn winding in the 2-ply & 3-ply process.
Reduced floor area with more spindles gives high productivity.
| No. Of Spindles | Length (ft) | Motor (hp) (ft) | |
|---|---|---|---|
| Primary | Secondary | ||
| 168 | 84 | 52 | 4.0 x 2 |
| 192 | 96 | 58 | 4.0 x 2 |
| 216 | 108 | 64 | 5.0 x 2 |
| 240 | 120 | 70 | 7.5 x 2 |
| 264 | 132 | 76 | 7.5 x 2 |
| 288 | 144 | 82 | 10 x 2 |
| 312 | 156 | 88 | 10 x 2 |
| No. Of Sections | No. Of Spindles | Length (ft) | Motor (hp) (ft) |
|---|---|---|---|
| 5 | 240 | 40 | 3.0 x 2 |
| 6 | 288 | 46 | 3.0 x 2 |
| 7 | 336 | 52 | 4.0 x 2 |
| 8 | 384 | 58 | 4.0 x 2 |
| 9 | 432 | 64 | 5.0 x 2 |
| 10 | 480 | 70 | 7.5 x 2 |
| No. Of Sections | No. Of Spindles | Length (ft) | Motor (hp) (ft) |
|---|---|---|---|
| 5 | 120 | 40 | 3.0 x 2 |
| 6 | 144 | 46 | 3.0 x 2 |
| 7 | 168 | 52 | 4.0 x 2 |
| 8 | 192 | 58 | 4.0 x 2 |
| 9 | 216 | 64 | 5.0 x 2 |
| 10 | 240 | 70 | 7.5 x 2 |
| No. Of Spindles | Length (ft) | Motor (hp) (ft) | |
|---|---|---|---|
| Primary | Secondary | ||
| 160 | 80 | 53 | 4.0 x 2 |
| 176 | 88 | 58 | 4.0 x 2 |
| 192 | 96 | 63 | 5.0 x 2 |
| 208 | 104 | 68 | 5.0 x 2 |
| 224 | 112 | 73 | 7.5 x 2 |
| 240 | 120 | 78 | 7.5 x 2 |
| No. Of Sections | No. Of Spindles | Length (ft) | Motor (hp) (ft) |
|---|---|---|---|
| 10 | 320 | 53 | 4.0 x 2 |
| 11 | 352 | 58 | 4.0 x 2 |
| 12 | 384 | 63 | 5.0 x 2 |
| 13 | 416 | 68 | 5.0 x 2 |
| 14 | 448 | 73 | 7.5 x 2 |
| 15 | 480 | 78 | 7.5 x 2 |
| No. Of Sections | No. Of Spindles | Length (ft) | Motor (hp) (ft) |
|---|---|---|---|
| 10 | 160 | 53 | 4.0 x 2 |
| 11 | 176 | 58 | 4.0 x 2 |
| 12 | 192 | 63 | 5.0 x 2 |
| 13 | 208 | 68 | 5.0 x 2 |
| 14 | 224 | 73 | 7.5 x 2 |
| 15 | 240 | 78 | 7.5 x 2 |
Made with
in INDIA.
